Scaffolding Cross Braces


  • Scaffolding Cross Braces
  • Galvanized inside and out to prevent rusting
  • 1.7 to 1.8 mm tube-wall thickness.
  • ends are hydraulically flattened and a hole punched center-of-hole to center-of-hole.
  • fits a stud spacing of 27.75 inches center-of-stud to center-of-stud on the frame.



Scaffolding Cross Braces

As an army needs reinforcement, scaffolds also require Scaffolding Cross Braces. These braces support the scaffolds in order to complement its strength and stability and alleviate fall accidents. Fall accidents are basically the cause of inefficient scaffolding equipment and improper set up. In order to establish strong scaffolds, workers should consider the following tips for Scaffolding Cross Braces

  • To organize everything, consult for professional engineers. The first thing that he’s going to discuss with you is the safety of the access and the feasibility at each stage. When it’s a nod, it’s advisable to prepare for attachable ladders. Do not use cross braces. These Scaffolding Cross Braces are not a good way of access. Before proceeding with the erection of the scaffolds, make sure that all workers are well-trained.
  • As for safety watch, it’s a good thing to use base plates and mud sills. Always see to it that the footing is well-in tack to the ground. Clear out possible movement or displacement of the footing. Building a strong scaffolds begin with a strong foundation. Aside from mud sills, you can also make use of the alternative concrete slab. It’s also a good idea to nail base plates.
  • You should follow the standard proportion between height to base and the width. Scaffolding Cross Braces For a rule of a thumb, the ratio that is greater than 4 to 1 should be avoided from tipping. Ties and braces are helpful to ensure safety. The width of scaffold frames should be 3-5 feet.
  • When connecting scaffolds to the building by a wire, make sure to have the wire inspected beforehand. Since there are no other possible ways of attaching the scaffolding to the building, wires should be in the best condition. Overused ones are to be rejected. Of course competent person should be the one to inspect.
  • Know the load capacity of the scaffolds. Scaffold braces are often bane if there are overloading. You should be crystal clear about the target weight of the scaffolds whether it’s good only for one person or a two. The strength of the components should be four rimes the weight of the load being exerted to them, in which the experts can accurately calculate.
  • Aside from the Scaffolding Cross Braces, another important component of scaffolds is guard rail.
  • The standard location should be strictly followed. Before the worker can make use of the scaffolds, guardrails should be installed along all open sides and platform ends.
  • Falling objects are natural in the course of erecting scaffolds. But it’s not natural to have then fallen in your head. Workers should wear safety hats that will ensure that they are protected against possible falling objects. Screens can be used to protect the persons below.

Workers are liable for their own selves. Though it’s really a must to build the tallest scaffolding for the tallest skyscraper just to have a single penny to live, we should not include accident in it. There are definitely risks but the most stable scaffold with the strongest scaffold braces will always mean safety. Scaffolding Cross Braces




Additional information


7 foot x 27.75 inches, 10 foot x 27.75 inches